Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Powell Peralta Skateboard Wheel Buying Guide

Powell Peralta wheels are defined by two distinct urethane formulas and shapes: modern high-performance G-Bones and classic old-school Rat Bones reissues. The core trade-off is durometer and profile versus terrain: harder, narrower wheels roll fast and slide predictably on smooth concrete, while softer, wider wheels absorb roughness and grip. Buy G-Bones for modern pool, park, and cruising speed; buy Rat Bones only if you are building a period-correct old-school setup or riding rough, debris-strewn surfaces.

Wheel Diameter:60mm (Rat Bones) / 64mm (G-Bones)Durometer Range:85A / 90A / 97AWheel Profile:Old-school wide vs modern narrowBearing Seat:Standard 608
Typical price range$39.95

At a glance

Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

Highlights

  • G-Bones use Powell's modern high-rebound urethane in a 64mm diameter and 97A durometer, optimized for speed and slide control on smooth transition and concrete.
  • Rat Bones reissues use a wider old-school profile at 60mm with a choice of 85A (soft, grippy, rough-surface) or 90A (harder, faster, skatepark) formulas.
  • Durometer is the single biggest performance lever: 97A+ rolls fast and slides clean; 85A-90A grips and absorbs vibration but wears faster and rolls slower.
  • Wheel diameter and width determine truck clearance and wheelbite risk: 64mm G-Bones need risers on most standard trucks, while 60mm Rat Bones fit closer to stock geometry.

Best use cases

  • Choose 64mm 97A G-Bones for modern pool, bowl, and park skating where speed, slide predictability, and hard urethane rebound matter most.
  • Choose 60mm 85A Rat Bones for rough asphalt, cracked sidewalks, and old-school cruising where grip and vibration absorption beat raw speed.
  • Choose 60mm 90A Rat Bones for a period-correct 1980s reissue build that still rolls reasonably fast on smooth skatepark concrete.
  • Skip G-Bones if you ride primarily rough, debris-covered streets; skip Rat Bones if you want maximum slide control and modern park performance.

Buying tips

  • Match durometer to surface: 97A and up for smooth concrete and parks; 85A-90A for rough asphalt and cracked pavement.
  • Account for diameter: 64mm wheels require 1/8-inch risers on most standard trucks to prevent wheelbite; 60mm usually fits stock geometry.
  • Check wheel width and offset: wider old-school Rat Bones profiles increase grip but reduce slide; narrower G-Bones slide more predictably.
  • Buy a full set of four in the same durometer and diameter; mixing formulas across axles ruins slide consistency and wear patterns.

Specs

Wheel Diameter60mm (Rat Bones) / 64mm (G-Bones)
Durometer Range85A / 90A / 97A
Wheel ProfileOld-school wide vs modern narrow
Bearing SeatStandard 608

Related searches

What to check before buying

  • Measure your deck width and truck axle width: 60mm Rat Bones suit narrower old-school decks; 64mm G-Bones suit wider modern pool decks.
  • Confirm truck height and riser needs: add 1/8-inch risers for 64mm wheels to avoid wheelbite on standard-height trucks.
  • Check your riding surface: smooth concrete favors 97A G-Bones; rough asphalt and debris favor 85A-90A Rat Bones.
  • Verify bearing seat: Powell Peralta wheels use standard 608 bearings, so any standard skate bearing fits without adapters.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.