Photos from current listings. Actual item, color, and included accessories may vary.
Ricta Skateboard Wheel Buying Guide
Ricta skateboard wheels are urethane wheels built for specific durometer and shape tiers, from 78A glow-in-the-dark cruiser compounds to 92A Chrome Clouds and harder park formulas. The primary trade-off is durometer versus riding style: soft wheels absorb rough pavement and roll fast, while hard wheels slide predictably and lock into grinds. The clear rule is to match durometer and width to your terrain—78A–92A for cruising and rough streets, 99A–101A+ for smooth parks and technical tricks—and skip any wheel whose shape or hardness fights that use.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Ricta's Clouds line spans soft cruiser compounds (78A glow, 92A Chrome) up to harder park formulas; lower durometer means more grip and vibration damping, higher means more slide and speed.
- Wheel diameter drives roll-over ability: 56–57mm cruiser sizes clear cracks and pebbles better than 51–53mm park sizes, which accelerate faster and sit closer to the truck for flip tricks.
- Ricta uses a urethane formula and shape families (e.g., Clouds cruiser vs. park/street profiles); wider contact patches grip and slow down, narrower edges break loose for slides.
- Bearings are sold separately and are not included with Ricta wheels; standard 608 bearings (8mm axle) fit all Ricta street and cruiser wheels.
Best use cases
- Best fit: 78A–92A Ricta Clouds in 56–57mm for rough asphalt, commuting, and cruiser setups—pick the 78A glow for maximum shock absorption and the 92A Chrome for a firmer, faster roll on mixed pavement.
- Best fit: 99A–101A+ Ricta park/street wheels in 51–54mm for smooth concrete skateparks and technical flip tricks—skip soft cruiser wheels here because they grip too hard, slow slides, and wear unevenly on smooth surfaces.
- Wrong fit: putting 78A glow wheels on a dedicated street-trick board—the soft compound squishes on landings, kills slide consistency, and makes ledge tricks feel sticky.
- Best fit: matching wheel width to truck axle—narrow wheels for flip tricks, wider contact patches for transition and cruising; skip mismatched widths that cause wheel bite or sluggish turning.
Buying tips
- Choose durometer by surface: 78A–92A for cracked streets and cruising, 99A–101A+ for smooth parks; each 5–7A step noticeably changes grip and slide behavior.
- Match diameter to discipline: 56–57mm for cruising and rough ground, 51–54mm for park and flip tricks; going above 58mm risks wheel bite on standard trucks without risers.
- Confirm bearing seat: all Ricta wheels use standard 608 bearings with an 8mm axle; buy bearings separately and match them to your truck axle diameter.
- Pick shape by contact patch: wider, rounder profiles grip and roll smoothly; narrower, sharper edges slide and lock into grinds—choose based on whether you cruise or trick.
Specs
| Durometer Range | 78A soft to 101A+ hard |
|---|---|
| Wheel Diameter | 51–57mm by discipline |
| Bearing Seat | Standard 608 / 8mm axle |
| Compound Type | Urethane, cruiser vs park |
Related searches
What to check before buying
- Measure your deck and truck width: wheel width should roughly match axle width so the contact patch sits flush without excessive overhang or wheel bite.
- Check terrain: rough asphalt and cracked sidewalks call for 78A–92A; smooth skatepark concrete calls for 99A+—mismatching durometer to surface ruins the ride.
- Verify truck axle standard: 8mm axles accept standard 608 bearings; confirm your trucks are standard and buy bearings separately since Ricta wheels ship without them.
- Account for wheel diameter versus riser height: 56–57mm wheels on standard trucks may need risers or tighter bushings to avoid wheel bite during hard turns.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


