Trail Gear Advisor

Shark Wheel Longboard Buying Guide

Shark Wheel longboard wheels use a sine-wave, 3-spoke geometry rather than a flat urethane contact patch, trading pure grip and slide predictability for roll-over debris and a distinctive lateral edge. The core decision is whether the wave profile's all-terrain benefit outweighs reduced flat-out grip and odd wear, so choose them for rough pavement or mixed-surface cruising and skip them for downhill grip or freestyle sliding.

Wheel Profile:Sine-wave 3-spoke vs flat contactLongboard Diameter:70-72mmDurometer Range:78A-83ABearing Standard:608 (8x22x7mm)

At a glance

Price range
Price range not synced yet
Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Sine-wave 'Shark Wheel' profile has 3 separated contact segments; the center rib and angled sidewalls roll over cracks and gravel that stop flat wheels.
  • Available as complete wheels or conversion kits; bearings are standard 608-size (22mm OD, 8mm ID, 7mm width) and fit any longboard truck axle.
  • Urethane hardness typically ranges from 78A to 83A; softer 78A grips and absorbs vibration, harder 83A slides easier and lasts longer.
  • Longboard sizes cluster around 70-72mm diameter with 78-83A durometer; larger diameters roll faster over rough ground but risk wheelbite on loose trucks.

Best use cases

  • Best fit: rough asphalt, brick, or mixed-surface commuting — pick 70-72mm, 78-80A Shark Wheels to absorb vibration and clear debris.
  • Best fit: cruiser or all-terrain longboard builds where roll-over ability matters more than slide control — choose 72mm complete wheels with included 608 bearings.
  • Wrong fit: downhill or freeride sliding — the wave contact patch breaks traction unpredictably; use 65-70mm flat contact wheels at 80-83A instead.
  • Skip for: technical freestyle/dancing requiring consistent slide and edge feel — flat-profile wheels at 78-80A give predictable grip and wear.

Buying tips

  • Match wheel diameter to truck width: 70-72mm wheels on longboard trucks need at least 180mm hanger width and 1/8-1/4 inch risers to avoid wheelbite.
  • Durometer rule: 78-80A for grip and rough pavement, 81-83A for longer wear and easier slides; Shark Wheels rarely go harder than 83A.
  • Buy complete wheels with 608 bearings and spacers included; converting standard wheels to Shark geometry requires the full wheel core, not just a sleeve.
  • Check axle compatibility: all longboard trucks use 8mm axles, so any 608 bearing set fits; bearing quality (ABEC 7 or better) matters more than the wave shape.

Specs

Wheel ProfileSine-wave 3-spoke vs flat contact
Longboard Diameter70-72mm
Durometer Range78A-83A
Bearing Standard608 (8x22x7mm)

Related searches

What to check before buying

  • Measure deck clearance: stand the board on flat ground and verify at least 1/2 inch between wheel edge and deck with trucks turned fully left and right.
  • Confirm truck hanger width: 180mm or wider for 70-72mm Shark Wheels; narrower trucks cause wheelbite and uneven wear.
  • Check riding surface: rough pavement and gravel suit the wave profile; smooth skatepark concrete does not need it and will wear the ribs unevenly.
  • Verify bearing size: 608 (8x22x7mm) is universal for longboard axles; confirm wheels ship with bearings or budget for a separate set.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.