Photos from current listings. Actual item, color, and included accessories may vary.
Skateboard Wheel And Bearing Buying Guide
Skateboard wheels and bearings are a matched system: wheel diameter, urethane hardness (durometer), and bearing ABEC grade determine speed, slide, and impact feel. The core trade-off is soft/grippy vs. hard/slideable urethane, and whether bearings are serviceable steel or sealed budget units. Choose by riding discipline first (street, park, cruiser), then match wheel durometer and bearing grade to that discipline.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Urethane durometer governs ride: 78A-85A cruiser wheels absorb rough pavement; 95A-99A street/park wheels slide and hold speed on smooth concrete.
- Wheel diameter controls acceleration vs. top speed: 50-54mm accelerates and flips quickly for street; 56-60mm+ rolls faster and clears cracks for cruising and bowls.
- ABEC rating measures bearing precision tolerance (ABEC 3/5/7/9), not load capacity or durability; sealed steel bearings with removable shields last longer than open or unshielded units.
- Bearing size is standardized at 8mm ID x 22mm OD x 7mm W (608 series), so any 608 bearing fits any standard skateboard wheel and truck axle.
Best use cases
- Street and technical flip tricks: pick 50-54mm, 95A-99A wheels with ABEC 5-7 steel bearings for fast flip rotation and predictable slides; skip soft cruiser urethane and oversized diameters.
- Park, transition, and bowl skating: pick 54-58mm, 97A-99A wheels with ABEC 7 bearings for speed retention on concrete; skip 78A cruiser wheels that squirm under transition load.
- Cruising, commuting, and rough pavement: pick 56-60mm, 78A-85A wheels with sealed ABEC 5-9 bearings for crack clearance and vibration damping; skip hard street wheels that transmit road chatter.
Buying tips
- Match durometer to surface: 78A-85A for asphalt and cracked paths, 95A-99A for skatepark concrete and street plazas, and 99A+ for slide-heavy freestyle.
- Size to your trucks: wheels 56mm and larger may require riser pads to prevent wheel bite on standard trucks; check deck-to-truck clearance before upsizing.
- Buy bearings by seal and material, not ABEC alone: rubber-sealed steel bearings resist grit and water better than metal-shielded or open bearings at the same ABEC grade.
- Confirm bearing count: wheels are sold in sets of 4, and a full board needs 8 bearings (2 per wheel); buy two bearing sets or a wheel-and-bearing combo to avoid a short install.
Specs
| Wheel Durometer | 78A cruiser to 99A+ street/park |
|---|---|
| Wheel Diameter | 50-60mm (street 50-54mm, cruiser 56-60mm) |
| Bearing Standard | 608 series: 8mm ID x 22mm OD x 7mm W |
| Bearing Grade | ABEC 3/5/7/9, sealed vs. shielded |
Related searches
What to check before buying
- Measure your deck and truck setup: wheel diameter plus truck geometry determines wheel-bite risk; add riser pads if upsizing beyond 56mm.
- Match bearing bore to axle: standard skateboard trucks use 8mm axles and 608 bearings; confirm your trucks are standard, not specialty micro or downhill axles.
- Check riding surface and climate: wet, gritty, or salted roads demand sealed bearings and softer urethane; dry smooth parks tolerate harder wheels and faster ABEC grades.
- Count required bearings and hardware: 8 bearings for 4 wheels, plus washers and axle nuts; confirm the wheel set includes bearings or budget for a separate bearing purchase.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


