Skateboard With Longboard Wheel Buying Guide
A skateboard with longboard wheels is a hybrid setup pairing a standard street deck and trucks with large, soft longboard wheels to smooth rough pavement and roll faster. The core trade-off is wheel diameter and durometer versus wheelbite and acceleration: bigger, softer wheels absorb vibration but require riser pads and can rub the deck on turns. The decision rule is simple — match wheel size to truck height and deck width, and choose a durometer grade based on surface roughness, not on cosmetic color.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Longboard wheels typically range 60–75 mm diameter and 78A–85A durometer; street wheels are 52–56 mm and 99A–101A, so a longboard-wheel swap increases roll speed and impact absorption substantially.
- Wheelbite occurs when wheel diameter exceeds available truck clearance; a 1/8-inch riser is generally the minimum needed to run 60–65 mm wheels on standard 53 mm street trucks.
- Bearings are standardized: Skate Rated bearings fit 8 mm axles and 22 mm wheel bores; ABEC-5 or ABEC-7 ratings describe precision tolerance, not load capacity or dirt resistance.
- Deck wheel wells and truck geometry determine maximum safe wheel size; drop-through or double-kick decks with wheel wells clear 65–70 mm wheels, while flat street decks typically max out near 60 mm without risers.
Best use cases
- Best fit: commuting or campus cruising on rough asphalt — pick 65–70 mm, 78A–80A wheels with 1/8–1/4-inch risers and softer bushings to absorb cracks and pebbles.
- Best fit: park and street tricks on a standard popsicle deck — stay at 52–56 mm, 99A–101A wheels; longboard wheels add swing weight and slow flip tricks noticeably.
- Wrong fit: downhill or freeride speed runs — a street deck with longboard wheels lacks the truck stability and deck stiffness for high-speed slides; use a proper longboard complete instead.
- Wrong fit: technical slalom or freestyle — large soft wheels reduce agility and make manual tricks harder; choose 54–58 mm hybrid wheels at 90A–95A for a compromise.
Buying tips
- Measure deck clearance first: with trucks mounted, the gap between wheel edge and deck underside should exceed your chosen wheel radius minus current wheel radius, or add risers accordingly.
- Match durometer to surface: 78A–82A for cracked asphalt and brick, 83A–88A for smooth concrete and mixed use, 90A+ for skatepark and trick-focused setups.
- Keep wheel width proportional to truck axle width: 60–65 mm wheels pair well with 139–149 mm trucks; oversized wide wheels on narrow trucks cause uneven wear and poor turning.
- Choose bearings by use, not ABEC number alone: sealed steel bearings suit wet or dusty commutes, while open or serviceable bearings suit dry park use and routine cleaning.
Specs
| Wheel Diameter | Street 52-56 mm / Longboard 60-75 mm |
|---|---|
| Durometer Range | Soft 78A-85A / Hard 99A-101A |
| Bearing Standard | 8 mm axle / 22 mm bore |
| Riser Requirement | 1/8-1/4 in for 60 mm+ wheels |
Related searches
What to check before buying
- Measure deck width and truck axle width; wheels wider than the axle expose edges to impact damage and destabilize turns.
- Confirm wheel-well clearance or plan for 1/8–1/4-inch riser pads and longer mounting bolts before installing wheels over 60 mm.
- Check axle diameter (8 mm standard) and wheel bore (22 mm standard) so bearings seat correctly without play.
- Assess riding surface and climate: soft 78A wheels grip wet pavement but wear faster in hot climates; harder urethane lasts longer on smooth dry concrete.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
