Photos from current listings. Actual item, color, and included accessories may vary.
Soft Skate Wheel Buying Guide
Soft skate wheels use urethane in the 78A–92A durometer range to absorb rough pavement, cracks, and debris, trading ollie pop and slide control for a smoother, quieter cruiser ride. The core trade-off is softness versus durability: lower durometers grip and dampen better but flat-spot faster, while higher durometers (near 92A) preserve speed and shape on smooth concrete. The decisive rule is simple—match durometer to surface: 78A–85A for cracked asphalt and long-distance cruising, 87A–92A for mixed bike paths and occasional street tricks, and skip anything below 78A unless you ride indoors or on pristine concrete.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Durometer is the primary performance lever: 78A–85A absorbs road vibration and grips loose gravel, while 87A–92A rolls faster on smooth concrete with less rebound loss.
- Wheel diameter controls acceleration and roll-over ability: 54–56mm accelerates quickly for tricks, 58–65mm holds speed and clears cracks on commutes.
- Contact patch width separates cruisers from trick wheels: 32–36mm narrow patches reduce drag and spin easily, 40mm+ wide patches add stability at the cost of weight and turn-in speed.
- Urethane quality determines flat-spot resistance: high-rebound, non-flatspot formulas (common in 90A+ cruiser lines) resist coning and chunking far better than budget poured urethane.
Best use cases
- Best fit for rough-city commuting: choose 58–62mm, 78A–82A wheels with a 40mm+ contact patch—soft enough to mute chatter and wide enough to stay stable over cracks.
- Best fit for park and mixed street riding: choose 54–56mm, 87A–92A wheels with a narrow 32–36mm patch for predictable slide and pop without flat-spotting on concrete.
- Wrong fit: buying sub-78A wheels for outdoor asphalt—they grip too hard, chunk on debris, and flat-spot within weeks; reserve ultra-soft urethane for indoor or smooth plaza surfaces.
- Wrong fit: putting 60mm+ soft cruiser wheels on a dedicated trick setup—wheel bite and sluggish pop make flip tricks frustrating; keep trick boards at 52–56mm.
Buying tips
- Match durometer to surface, not style: 78A–85A for asphalt and gravel, 86A–92A for smooth concrete and skatepark, and never assume a soft wheel is automatically a cruiser wheel.
- Size wheels to your trucks and deck: 56mm and under fits standard trucks without risers; 58mm+ may require 1/8-inch risers to prevent wheel bite on tight turns.
- Check bearing seat compatibility: standard 608 bearings fit all common skate wheels, but confirm the wheel uses a standard 8mm axle bore and includes spacers for proper side load.
- Prioritize urethane formula over color: high-rebound, flat-spot-resistant compounds in the 90A–92A range outlast generic soft urethane even when the durometer rating looks similar.
Specs
| Durometer Range | 78A–92A soft urethane |
|---|---|
| Wheel Diameter | 54–65mm (cruiser vs trick) |
| Contact Patch | 32–40mm+ width |
| Bearing Seat | Standard 608 / 8mm axle |
Related searches
What to check before buying
- Measure your deck width and truck axle length: wheels wider than 36mm contact patch on a narrow truck can cause wheel bite and unstable turning.
- Confirm your riding surface: cracked asphalt, smooth concrete, and indoor park each call for a different durometer band before you pick a size.
- Check riser clearance: if you plan 58mm+ wheels, verify your deck has at least 1/8-inch riser space or truck geometry that clears the board on hard turns.
- Verify bearing and spacer standard: standard 608 bearings and 8mm axles fit all common wheels, but include spacers and speed washers to prevent bearing bind.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

