Photos from current listings. Actual item, color, and included accessories may vary.
Independent Skateboard Truck Buying Guide
Independent Skateboard Trucks are the benchmark for durability and turn geometry, defined by their Stage generations (Stage 4, 11, etc.) and forged vs. cast construction. The primary trade-off is weight vs. strength and turn feel: standard cast models are heavier but virtually indestructible, while hollow/forged versions reduce weight at a higher cost and slightly different geometry. The decision rule: match axle width to deck width (within 0.25"), choose Stage 11 for modern all-around riding, Stage 4 for old-school geometry, and avoid hollow versions unless every gram matters for technical street skating.
At a glance
- Category
- Skateboard Trucks & Hardware
- Data updated
- Nov 16, 2026
Current offers
Independent Skateboard Trucks Stage 11 Standard Silver Raw 139 (8.0") Pair of 2$50.95View on eBay
Independent Skateboard Trucks Stage 11 Standard Bar Flat Black 139 (8.0") Pair$53.95View on eBay
Independent Skateboard Trucks Stage 11 Standard Silver Raw 159 (8.75") Pair of 2$59.90View on eBay
Independent Skateboard Trucks 109 Retro Style T-Hanger Pair 6.9" Axle Old School$59.90View on eBay
Independent Skateboard Trucks Stage 11 Standard Silver Raw 169 (9.12") Pair of 2$61.90View on eBay
Independent Skateboard Trucks Stage 11 Silver 149 (8.5") + Indy Hardware, Risers$64.90View on eBay
Independent Skateboard Trucks Reynolds Hollow with Spitfire Wheels, Abec 5 Bear$79.95View on eBay
Independent Stage 4 Blackout Skateboard Trucks (Set of 2)$61.95View on eBay
Independent Stage 11 Blackout Standard Skateboard Trucks (Set of 2)$65.95View on eBay
Independent Trucks FA LTD 159 Stage 11 Skateboard Trucks - 6.0" New 2018 Rare$85.00View on eBay
Highlights
- Stage 11 uses a 55mm height and updated geometry for quicker pop and more stable grinds compared to Stage 10; Stage 4 has a lower 53.5mm height and narrower hanger for vintage feel.
- Standard models use cast aluminum hangers and baseplates; Hollow models use forged baseplates and hollow kingpin/axle to save weight but cost more and can dent under heavy impact.
- Axle width (e.g., 139mm for 8.0" deck, 149mm for 8.5") is the critical fit spec: match deck width within 0.25" for optimal leverage and no wheel bite.
- Independent trucks come with 90a bushings (medium) and grade-8 kingpins; replacement parts are widely available, and the kingpin nut is 9/16".
Best use cases
- Best fit: Street and park skaters riding 8.0"–8.5" decks who want maximum durability and turn response—choose Stage 11 Standard in 139 or 149.
- Best fit: Old-school pool or cruiser setups with wider decks (8.75"+) needing classic geometry—choose Stage 4 or 159/169 widths.
- Wrong fit: Weight-obsessed technical skaters should skip standard cast trucks and choose Hollow or Titanium versions; otherwise accept the extra grams for strength.
- Wrong fit: Kids or lightweight riders under 100 lbs should avoid stiff 90a bushings; swap to 78a–85a bushings for proper turn.
Buying tips
- Match axle width to deck width: 129mm for 7.5"–7.75", 139mm for 8.0"–8.25", 149mm for 8.25"–8.5", 159mm for 8.5"–8.75", 169mm for 8.75"–9.0".
- Choose Stage 11 for modern street/park (higher pop, stable grinds); Stage 4 for old-school geometry (lower height, quicker turns) on cruisers or pool boards.
- Hollow versions save roughly 0.3–0.5 lbs per pair but use forged baseplates and hollow axles; they are less resistant to severe impacts and cost more.
- Standard kingpin is 3/8"-24; replacement bushings and kingpins are universal across Independent stages, so buy spares in 90a or 92a for tighter setups.
Specs
| Truck Stage | Stage 11 (modern) / Stage 4 (old-school) |
|---|---|
| Axle Width | 129–169mm (match deck width ±0.25") |
| Construction | Cast standard / Forged hollow |
| Bushing Hardness | 90a stock (medium) |
Related searches
What to check before buying
- Measure your deck width at the widest point; select truck axle width within 0.25" of that number to avoid wheel bite or poor leverage.
- Check your deck's truck mounting holes: Independent uses standard 8-hole pattern (2.125" x 1.625"), compatible with all modern decks.
- Confirm your wheel size: trucks over 55mm height (Stage 11) fit wheels up to 56mm without risers; larger wheels need 1/8" risers to prevent bite.
- Inspect your kingpin clearance: Stage 11 has more clearance for grinds; if you do slappy grinds, avoid hollow kingpins that can bend.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
