Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Skateboard Hardware Buying Guide

Skateboard hardware covers the metal fasteners, riser pads, and truck components that connect deck to wheels—bolt grade, axle/hanger geometry, and riser material determine whether a setup holds torque and pop or loosens and cracks. The core trade-off is between hardened, dimensionally standardized parts (grade-8 bolts, forged baseplates, correct axle widths) and softer, undersized commodity parts that strip or bend. Choose hardware matched to deck width and truck axle length; skip anything without a stated steel grade or durometer.

Truck Axle Width:139/144/149/159/169mm by deck widthBolt Grade:Grade 8 / 10.9 hardened steelRiser Durometer:95A+ hard plastic / 60-80A soft rubberBaseplate Type:Forged aluminum vs cast aluminum
Typical price range$64.90

At a glance

Category
Skateboard Trucks & Hardware
Data updated
Nov 16, 2026

Current offers

Highlights

  • Truck axle width must match deck width: 8.0" deck pairs with 139mm axles, 8.25" with 144mm, 8.5" with 149mm, 8.75" with 159mm; mismatched axle length causes wheel bite or exposed axle ends.
  • Hardware bolts: Grade 8 (SAE) or 10.9 (metric) hardened steel resists stripping; cheap unrated bolts round off under 7/8" allen key torque.
  • Riser pads: hard plastic (95A+) for vibration damping with minimal geometry change; soft rubber (60-80A) absorbs shock but flexes and changes truck geometry.
  • Truck baseplate construction: forged aluminum is stronger and lighter than cast; hollow kingpins and axles reduce weight but cost more and suit advanced riders.

Best use cases

  • Street/park setup: pick forged-baseplate trucks in correct axle width for your 8.0-8.5" deck, grade-8 7/8" bolts, and no risers (or 1/8" hard plastic) to keep pop responsive.
  • Cruiser/carving setup: choose wider 159-169mm axles with 1/4"-1/2" soft risers for clearance on large wheels, accepting extra height and flex.
  • Wrong fit to skip: don't buy unrated bolts or cast trucks for high-impact skating, and don't put 1/2" risers on a street deck—pop and stability suffer.

Buying tips

  • Measure deck width at the widest point; match truck axle width to that number (8.5" deck → 149mm axle). A ±0.125" variance is acceptable; more causes handling quirks.
  • Require a stated steel grade on bolts (Grade 8 / 10.9) and a durometer on bushings (e.g., 90A-94A for street, 87A-90A for cruising).
  • Riser thickness: 1/8" for minor vibration damping, 1/4" for wheel clearance with 56-60mm wheels, 1/2" only for large cruiser wheels (65mm+).
  • Truck kingpin: standard (non-hollow) for durability; hollow kingpin/axle for weight savings but inspect for bending after hard impacts.

Specs

Truck Axle Width139/144/149/159/169mm by deck width
Bolt GradeGrade 8 / 10.9 hardened steel
Riser Durometer95A+ hard plastic / 60-80A soft rubber
Baseplate TypeForged aluminum vs cast aluminum

Related searches

What to check before buying

  • Confirm deck width and truck axle width match within 0.125" before ordering trucks.
  • Check bolt length: 7/8" for no risers, 1" for 1/8" risers, 1.25" for 1/4" risers, 1.5" for 1/2" risers.
  • Verify wheel diameter and riser thickness give at least 1/8" clearance to avoid wheel bite.
  • Ensure your skate tool or allen key size matches the bolt head (usually 7/8" or 1/8" allen) and kingpin nut.

FAQ

All Skateboard Trucks & Hardware buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.