Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Tensor Skateboard Truck Buying Guide

Tensor Skateboard Trucks are a long-running truck brand defined by their low-profile geometry and responsive turn, with the main trade-off being weight versus durability across their alloy and forged lines. The decision rule is simple: pick the standard cast alloy for budget street setups, the forged or magnesium version for weight savings and added strength, and always match axle width to deck width within 0.25 inches.

Hanger Material:Cast alloy / Forged 6061 / MagnesiumAxle Widths:5.0 / 5.25 / 5.5 / 5.75 inDeck Fit Range:7.5-8.5 in (match width)Bushing Durometer:90a-92a stock urethane
Typical price range$29.86

At a glance

Category
Skateboard Trucks & Hardware
Data updated
Nov 16, 2026

Current offers

Highlights

  • Tensor's standard trucks use cast 356 aluminum hangers with steel axles; the forged line uses 6061-T6 aluminum for roughly 15-20% weight savings and higher yield strength.
  • Tensor's magnesium alloy models are the lightest in the lineup but sacrifice some grind durability on concrete ledges compared to forged aluminum.
  • Tensor trucks come in 5.0, 5.25, 5.5, and 5.75 axle widths; the model number corresponds roughly to axle length in inches times 1.0, so 5.25 fits decks 7.75-8.0 inches.
  • All Tensor trucks ship with 90a-92a urethane bushings and standard 8mm steel axles; kingpin replacement compatibility is brand-specific due to low-profile hanger geometry.

Best use cases

  • Choose Tensor 5.25 for 7.75-8.0 inch decks: best for street skating with flip tricks where low weight and quick response matter most.
  • Choose Tensor 5.5 for 8.0-8.25 inch decks: the all-around pick for park and transition skating where stability at speed is the priority.
  • Skip Tensor magnesium models if you primarily grind rough concrete ledges daily; the weight savings come at the cost of accelerated hanger wear.
  • Skip forged Tensors for a pure budget first setup; standard cast alloy Tensors deliver the same geometry and turn at lower cost with adequate durability for learning.

Buying tips

  • Match axle width to deck width: a 5.25 truck pairs with 7.75-8.0 inch decks; a 5.5 truck pairs with 8.0-8.25 inch decks; never exceed 0.25 inches of overhang per side.
  • Pick forged or magnesium only if you are weight-conscious and willing to pay more; standard cast Tensor trucks are the durability-per-cost sweet spot.
  • Confirm the truck includes both baseplate and hanger; some listings sell hangers only, which requires reusing your existing baseplate and bushings.
  • Check bushing durometer: stock 90a-92a suits riders under roughly 180 lbs; heavier riders should plan to swap in 94a+ bushings for stable turn.

Specs

Hanger MaterialCast alloy / Forged 6061 / Magnesium
Axle Widths5.0 / 5.25 / 5.5 / 5.75 in
Deck Fit Range7.5-8.5 in (match width)
Bushing Durometer90a-92a stock urethane

Related searches

What to check before buying

  • Measure your deck width at the widest point to select the correct Tensor axle width (5.25 vs 5.5) before ordering.
  • Verify your deck's truck mounting hole pattern is standard 8-hole (2.125 inch spacing); Tensor baseplates fit standard patterns only.
  • Confirm your wheels use standard 8mm bearings and axles; Tensor trucks accept standard skate bearings and most street/park wheels.
  • Check your local climate and skating surface: magnesium hangers wear faster on abrasive concrete; cast or forged aluminum is better for rough daily use.

FAQ

All Skateboard Trucks & Hardware buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.