Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Skateboard Truck Buying Guide

Skateboard trucks are the metal T-shaped axles that mount under the deck and hold the wheels, and the main trade-off is between forged/standard geometry for durability and response versus cheaper cast construction that bends or wears faster. The decisive rule: match axle width to deck width within about 0.25 inch, insist on hardened steel axles and kingpins, and skip any truck with unspecified axle material or non-replaceable bushings.

Axle Width:139mm / 149mm / 159mmBaseplate Material:Forged aluminum vs cast aluminumAxle Steel:4140 chromoly vs unspecified steelBushing Durometer:85A-97A (stock 90A)
Typical price range$22.95 – $85.00

At a glance

Category
Skateboard Trucks & Hardware
Data updated
Nov 16, 2026

Current offers

Highlights

  • Axle width must match deck width: 139mm (8.0") for 7.75-8.25" decks, 149mm (8.25") for 8.0-8.5", 159mm (8.5") for 8.25-8.75".
  • Forged baseplates and hollow kingpins reduce weight 10-15% versus cast standard trucks without sacrificing strength.
  • Stage 11 Independent geometry uses a lower kingpin clearance and revised bushing seat for more turn per lean than Stage 10.
  • Hardened 4140 chromoly steel axles resist bending; trucks with unspecified or aluminum axles are a durability compromise.

Best use cases

  • Street and park skating: pick a 139-149mm standard-height truck with forged baseplate and 90-94A bushings; skip low-profile downhill trucks that reduce turn.
  • Cruising and carving: choose a 149-159mm truck with softer 85-88A bushings and standard kingpin clearance; avoid ultra-light hollow trucks that flex under heavy carving.
  • Technical flip tricks on 8.0-8.25" decks: select 139mm trucks with a low kingpin (e.g., Krux Down Low Kingpin) to reduce ghost pop; skip 159mm trucks that make flip tricks sluggish.
  • Downhill and freeride: use 159-169mm precision or forged trucks with 93-97A bushings and Grade 8 kingpins; never use cast entry-level trucks for speeds above 25 mph.

Buying tips

  • Measure deck width at the widest point: trucks should be within 0.25" of deck width, so an 8.25" deck takes 144-149mm trucks, not 139mm.
  • Demand 4140 chromoly or hardened steel axles and kingpins; aluminum or unlisted axle steel bends on 3+ foot drops.
  • Bushing durometer 90-94A suits riders 120-180 lbs; go 94-97A above 180 lbs or for downhill, 85-88A for carving and lighter riders.
  • Replace stock bushings immediately on trucks under 90A if you weigh over 160 lbs; stock cone bushings wear out in weeks under heavy skating.

Specs

Axle Width139mm / 149mm / 159mm
Baseplate MaterialForged aluminum vs cast aluminum
Axle Steel4140 chromoly vs unspecified steel
Bushing Durometer85A-97A (stock 90A)

Related searches

What to check before buying

  • Measure deck width at the bolt holes and choose truck axle width within 0.25 inch (139mm=8.0", 149mm=8.25", 159mm=8.5").
  • Confirm your deck's bolt pattern is standard 2.125" (54mm) apart; most modern decks use this, but reissues may differ.
  • Check wheel clearance: 149mm trucks fit 52-56mm wheels without bite on 8.25" decks; wider wheels need 159mm trucks.
  • Verify kingpin nut type (standard 9/16" or allen) matches your skate tool before buying replacement bushings.

FAQ

All Skateboard Trucks & Hardware buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.